Megger DET4TC2 Pro Earth Tester Kit Details This bundle package includes Megger’s DET4TC2 Digital Ground Tester as well as a large bundle package that includes two different clamps, a specialist professional ground testing kit and other equipment as well. The DET4TC2 is a non-rechargeable earth testing device, but it’s still highly capable and can carry out both 25/50V testing procedures which can be switched between with the click of a button. Frequencies can also be changed in a similar way and the device features a rotary dial that is used for choosing the exact type of test that is to be carried out (selectable frequencies are 94Hz, 105Hz, 111Hz and 128Hz). Since this package includes clamps – the Megger ICLAMP and VCLAMP – the DET4TC2 is also able to perform attached rod technique (ART) and stakeless testing procedures. As standard the DET4TC2 can perform 2-pole, 3-pole and 4-pole testing with variable frequency, leakage current and ground noise voltage measurements. The DET4TC2 also has in-built noise rejection at 40V peak to peak. In terms of range, the Megger DET4TC2 includes a general measurement range of 0.01 to 200kΩ, ground noise voltage measurements from 1V to 100V and ground current from 1mA to 20A. Accuracy is maintained between tests thanks to the noise rejection and variable frequencies which can be adjusted as necessary to generate the most accurate results possible. Megger DET4TC2 Key Features Runs on 8 AA batteries IP54 rating 2, 3 and 4-pole testing with variable frequency Optional backlight for use in darkened conditions Portable and lightweight testing device with rubber-moulded surface Attached rod technique (ART) testing Stakeless measurements Selectable output voltage Easy to use with rotary dial and clearly labelled buttons Full List of Products Included In Kit Megger DET4TC2 Digital Ground Tester Hard Carry Case Stake and Wire Kit (Includes 15m, 10m, 10m and 3m cables) ICLAMP (enables ART testing) VLAMP (enables stakeless testing) Field calibration check for instrument and included clamps Right angle terminal adaptors Separate Professional Ground Testing Kit (Includes 2 x 50m and 2 x 30m cables, 4 auger stakes and tape measure in hard carry case) Specification Resistance range: 0.01 to 200 kΩ autoranging (0.01 to 20kΩ for models DET4TD2 and DET4TR2) Resistance accuracy: 2P measurements 2% ±3 digits 3P measurements 2% ±3 digits 4P measurements 2% ±3 digits ART measurements 5% ±3 digits Stakeless measurements 7% ±3 digits Maximum probe resistance: DET4TC2 and DET4TCR2 Rp limit: 200kΩ (50V output voltage) Rc limit: 200kΩ (50V output voltage) Limits reduced to 100kΩ for 25V output voltage Limits reduced to 5kΩ for 0.01 Ω resolution Earth voltage range: 0 – 100 V Earth voltage accuracy: 2% ±2 V 2-wire test: Yes, 3-wire test: Yes, 4-wire test: Yes, ART (Attached Rod Technique): DET4TC2, DET4TCR2 Stakeless test: DET4TC2 and DET4TCR2 Ground current range (with current measuring clamp): 0.5 mA to 19.9 A Ground current accuracy: 5% ±3 digits Display: DET4TC2 and DET4TCR2: 3-1/2 digit high contrast LCD, backlit Test frequency: 94, 105, 111 and 128 Hz Test voltage: 25 V or 50 V, user selectable (factory setting 50 V) Test current: 450 micro-amps at 25 V or 50 V (selectable), 4.5 mA at 25 V Noise rejection: 40V pk to pk Noise check: Automatic C spike check: Automatic P spike check: Automatic Battery type: 8 1.5 V AA cells (8 1.5 V AA NiMH rechargeable cells – DET4TR2 and DET4TCR2) Battery life: 3 hours, 700 consecutive tests Safety: EN61010-1 CAT IV 100 V Terminals: 4 mm plug type (test leads) Ingress protection: IP54 EMC: Meets the requirements of EN61326-1:1998 for use in heavy industrial areas, including amendment 1 Dimensions: 8 x 5.7 x 3.2 in. (203 x 148 x 78 mm) Weight: 2.2 lb (1 kg) Operating temperature range: 5º to +131º F (-15º to +55º C) Storage temperature range: -40º to +158º F (-40º to +70º C) Humidity: 95% RH non-condensing at 104º F (40º C)
Megger DET4TC2 Pro Earth Tester Kit Details This bundle package includes Megger’s DET4TC2 Digital Ground Tester as well as a large bundle package that includes two different clamps, a specialist professional ground testing kit and other equipment as well. The DET4TC2 is a non-rechargeable earth testing device, but it’s still highly capable and can carry out both 25/50V testing procedures which can be switched between with the click of a button. Frequencies can also be changed in a similar way and the device features a rotary dial that is used for choosing the exact type of test that is to be carried out (selectable frequencies are 94Hz, 105Hz, 111Hz and 128Hz). Since this package includes clamps – the Megger ICLAMP and VCLAMP – the DET4TC2 is also able to perform attached rod technique (ART) and stakeless testing procedures. As standard the DET4TC2 can perform 2-pole, 3-pole and 4-pole testing with variable frequency, leakage current and ground noise voltage measurements. The DET4TC2 also has in-built noise rejection at 40V peak to peak. In terms of range, the Megger DET4TC2 includes a general measurement range of 0.01 to 200kΩ, ground noise voltage measurements from 1V to 100V and ground current from 1mA to 20A. Accuracy is maintained between tests thanks to the noise rejection and variable frequencies which can be adjusted as necessary to generate the most accurate results possible. Megger DET4TC2 Key Features Runs on 8 AA batteries IP54 rating 2, 3 and 4-pole testing with variable frequency Optional backlight for use in darkened conditions Portable and lightweight testing device with rubber-moulded surface Attached rod technique (ART) testing Stakeless measurements Selectable output voltage Easy to use with rotary dial and clearly labelled buttons Full List of Products Included In Kit Megger DET4TC2 Digital Ground Tester Hard Carry Case Stake and Wire Kit (Includes 15m, 10m, 10m and 3m cables) ICLAMP (enables ART testing) VLAMP (enables stakeless testing) Field calibration check for instrument and included clamps Right angle terminal adaptors Separate Professional Ground Testing Kit (Includes 2 x 50m and 2 x 30m cables, 4 auger stakes and tape measure in hard carry case) Specification Resistance range: 0.01 to 200 kΩ autoranging (0.01 to 20kΩ for models DET4TD2 and DET4TR2) Resistance accuracy: 2P measurements 2% ±3 digits 3P measurements 2% ±3 digits 4P measurements 2% ±3 digits ART measurements 5% ±3 digits Stakeless measurements 7% ±3 digits Maximum probe resistance: DET4TC2 and DET4TCR2 Rp limit: 200kΩ (50V output voltage) Rc limit: 200kΩ (50V output voltage) Limits reduced to 100kΩ for 25V output voltage Limits reduced to 5kΩ for 0.01 Ω resolution Earth voltage range: 0 – 100 V Earth voltage accuracy: 2% ±2 V 2-wire test: Yes, 3-wire test: Yes, 4-wire test: Yes, ART (Attached Rod Technique): DET4TC2, DET4TCR2 Stakeless test: DET4TC2 and DET4TCR2 Ground current range (with current measuring clamp): 0.5 mA to 19.9 A Ground current accuracy: 5% ±3 digits Display: DET4TC2 and DET4TCR2: 3-1/2 digit high contrast LCD, backlit Test frequency: 94, 105, 111 and 128 Hz Test voltage: 25 V or 50 V, user selectable (factory setting 50 V) Test current: 450 micro-amps at 25 V or 50 V (selectable), 4.5 mA at 25 V Noise rejection: 40V pk to pk Noise check: Automatic C spike check: Automatic P spike check: Automatic Battery type: 8 1.5 V AA cells (8 1.5 V AA NiMH rechargeable cells – DET4TR2 and DET4TCR2) Battery life: 3 hours, 700 consecutive tests Safety: EN61010-1 CAT IV 100 V Terminals: 4 mm plug type (test leads) Ingress protection: IP54 EMC: Meets the requirements of EN61326-1:1998 for use in heavy industrial areas, including amendment 1 Dimensions: 8 x 5.7 x 3.2 in. (203 x 148 x 78 mm) Weight: 2.2 lb (1 kg) Operating temperature range: 5º to +131º F (-15º to +55º C) Storage temperature range: -40º to +158º F (-40º to +70º C) Humidity: 95% RH non-condensing at 104º F (40º C)
Padlocks,
lightbulbs,
disposable shoe covers,
A3 stickers for printer,
LED flood lights,
astro turf,
pallet with wheels,
screw drivers set,
car dipstick,
fire alarms,
head torches,
fire resistant safe,
collapsible traffic cones,
electric hand dryers,
Samsung Nokia iphone and blackberry mobile phones,
Broad band routers,
road signs,
double Juicer machines
... and many more
